Description
The Rich Solar 12-volt, 200-amp-hour LiFePO4 lithium-ion phosphate battery has a much longer cycle life capacity, and is easier to maintain compared to other battery technologies. The LiFePO4 technology has better thermal and chemical stability, which improves battery safety, is packed with power in a small and lightweight footprint. The space required to install this battery is such that it easily fits your existing the space occupied by your existing 12V battery. It also replaces lead acid, AGM or Gel battery applications in RVs, boats, commercial vehicles, off grid back up power and much more. This battery, however, is not intended to replace starting batteries.
| Electrical Specifications | |
| Manufacturer Name: | Rich Solar |
| Nominal Voltage: | 12.8V |
| Nominal Capacity (at .5C, 77F): | 200Ah |
| Minimum Capacity (at .5C, 77F): | 190Ah |
| Expected Cycle Life: | Greater than 3000 cycles w/1C charge and discharge rate, at 77F, 80% DOD |
| Operating Specifications | |
| Charge Method: | Smart charger, constant current, constant voltage |
| Operating Voltage: | 12.8 V |
| Capacity: | 200 Ah |
| Energy: | 2560 Watt Hours |
| Charge Voltage Range (Max 14.6V): | 14.4 - 14.6V |
| Continuous Charge Current: | 100A |
| Continuous Discharge Current: | 200A |
| Over Voltage Shutdown: | 15.6 +/-0.2V |
| Discharge Cut-off Voltage: | 8V =/- 0.5V |
| Self Discharge (stored at 50% SOC): | great than 3%/month |
| Waterproof: | IP65 |
| Temperature Performance | |
| Charge Temperature: | 32 F to 140 F |
| Discharge Temperature: | -4 F to 140 F |
| Storage Temperature: | -4 F to 140 F |
| BMS High Temperature Cut-off: | 149F |
| BMS Low Temperature Cut-off: | 32F |
| Physical Specifications | |
| Battery Dimensions: | 19" L x 6.7" W x 9.5" H |
| Weight: | 42.5 lb |
| Group Size: | 62 |
| Battery Post Size: | 5/16" |
| Over Charge Protection | |
| Over Charge Detection Voltage: | 3.9 +/- 0.05V |
| Over Charge Detection Delay Time: | 0.96 - 1.4s |
| Over Charge Release Voltage: | 3.80 +/-0.05V |
| Maximum Charge Voltage: | 3.65 +/-0.05V |
| Over Discharge Protection | |
| Over Discharge Detection Voltage: | 2.0V +/- 0.05V |
| Over Discharge Detection Delay Time: | 115-173ms |
| Over Discharge Release Voltage: | 2.3V +/- 0.10V |
| Over Current Protection Over current detection delay time: | 9 +/- 2ms |
| Over Current Release Condition: | Cut load |
| Polarity Reverse Protection: | Yes |
| Short Circuit Protection: | Yes |
